A friend asked me what I do with concrete in my backyard.
I thought about it for a while and said, “Oh, I paint concrete.
That’s the only way I can do it.”
I’m glad I did.
Concrete isn’t just an awesome way to make things look good.
It’s also a powerful and unique medium for art, and you can learn more about how to make it yourself with this DIY concrete art project.
First, you need some cement.
If you have a garage or a backyard that’s not quite large enough, you can use regular concrete, which is just a mix of crushed concrete and gravel.
You can also mix in the leftover bits of concrete that’s left over from your garden.
If the yard is big enough, buy the concrete from a contractor and pour it into the driveway, so you have lots of room for your kids to play and take pictures.
(It’s also fine to mix it with cement or gravel to make a concrete deck.)
Next, you’ll need a sprayer or paint brush, which you can buy at hardware stores.
I use a spray gun, which costs $30 or so at Home Depot.
The best way to use it is to brush in the concrete, then spray it on a wall or ceiling and spray it in the opposite direction.
You’ll need to wait for the concrete to dry and then let it sit for about 30 minutes before painting it.
Once it’s dry, you want to spray it with a white paint.
You may also want to paint your concrete walls or ceiling to match the color of the paint you’ve used to paint them.
Finally, you should have a large area to spray the paint on, about 12 inches by 6 inches.
You don’t want it to dry out, so plan ahead.
I like to use a small bucket filled with water, but any container will work.
If using the paintbrush, I put the paint brush in a bucket of water and let it soak for about 10 minutes.
Then, I wash it with some water and spray the concrete in the same direction.
The spray gun is a great option for this, but you can also spray it directly on your concrete.
To make the painting, you have three main options: You can mix the cement with some of the gravel and water.
You should do this if you want it smooth and even.
Or, you could mix it all up and use some leftover gravel and some of your favorite paint.
This will create a smooth and evenly mixed base coat, which should look like a finished concrete surface.
You will also want the spray gun to spray into the concrete.
This method is pretty easy, and if you do it right, you will have a smooth, consistent base coat.
To make a smooth coat, you spray a small amount of paint onto the concrete and paint in the direction you want.
Then you spray in the next direction and wait.
If there’s any residual paint, you may need to sand it down a bit.
You could also do a spray coat with water to create a sanded-down look.
Finally to add a little texture to the paint, mix in some powdered concrete, or even sand and mix it together.
It doesn’t need to be exactly the same color as the base coat—just make sure the color you’re adding is a good match.
The finished concrete is now ready to go.
Spray it with white paint and let dry for about a minute before painting.
You want the paint to be very smooth, but not too grainy.
Next, you add some water.
This is the water that will help it to stick to the concrete while you spray it.
You’re using a paintbrush to spray onto the basecoat and not the paint.
I put my paintbrush in the bucket of concrete and let the paint soak for 10 minutes, then sprayed in the other direction.
I then let the cement dry.
The paint was very smooth.
After the cement dried, I sprayed a thin layer of white paint onto it.
The white paint added a little more detail and texture, and added a lot of interest to the painting.
The painted concrete was also a lot more visible, so it looked like a solid wall.
The white paint was a great addition to the base color.
I used the white paint to give the base a nice finish.
Finally you can let the base paint dry completely before applying the paint with the sprayer.
The base coat should be completely dry by this point, so if you need more, you won’t have to do anything.
I had to wait a few minutes for it to fully dry, but it should be pretty easy to reapply.
Once the base has dried completely, you’re ready to paint.
Here’s what you do.1.
Make sure your spray gun can spray the right color.
If your paintbrush is too coarse, it won’t stick. You need